A power tool is a tool that is actuated by an additional power source and mechanism other than the solely manual labor used with hand tools.
The most common types of power tools use electric motors, pneumatics, or hydraulics.
To prevent injuries, incidents, and damage to power tools, always take the following precautions:
- Never carry a power tool by the cord.
- Never disconnect a power tool by yanking the cord to remove the plug from the receptacle.
- Keep tool cords away from sources of excessive heat and sharp edges.
- Disconnect tools when not using them, prior to servicing and cleaning, and when changing accessories such as blades and bits.
- Keep people not involved in the work at a safe distance.
- Secure work with clamps or a vise. This allows you to operate the tool with two hands.
- Do not hold fingers on the power button while carrying a tool that is plugged in.
- Follow the instructions provided in the user manual.
- Keep good footing, and maintain good balance.
- Wear proper apparel for the required task. Avoid wearing loose clothing or jewelry that can become caught in moving parts.
- Wear proper personal protective equipment such as gloves, face, and eye protection.
Always inspect power tools prior to use. If a tool is not in safe operating condition, remove the tool from service, and affix a “Do Not Use” tag.
Work safe. Farm safe. Home safe.™
Make sure you have the right equipment
Most pickup trucks will have tie down points already installed. For more added security, it is often a good idea to purchase some additional equipment. For loose items, you may want to add a toolbox or Tonneau cover
You will also want to make sure that you have some good quality ratchet straps, bungee cords or tarps depending on what you are carrying.
Know how much load your truck can carry
Especially if you are transporting heavy items, you need to know your vehicle’s gross vehicle weight rating as well as your load capacity. You should be able to find this information on a label inside your driver’s door or in your owner’s manual. Under no circumstances should you exceed this limit because doing so could damage your vehicle.
Put heavier items toward the front
When loading your pickup truck, always try to put heavier items toward the cab to prevent your vehicle from becoming back-weighted and affecting your power steering. You should also try to distribute the weight fairly evenly from side to side.
Secure items on at least two sides
Once you’ve following all of the tips listed above, it is important that your items are tied down on at least two sides. This will help keep items from moving around and potentially coming loose. Items that bounce around inside your truck can cause damage or become damaged themselves, and if they end up falling out of your truck, they may cause a serious accident.
Flag long loads
If you are transporting longer items that extend beyond the length of your truck bed, you are required by law to attach a red flag or cloth to the end of the load. If you do not have something at home that you can attach to the load, you may purchase a tailgate flag at your local home improvement centre.
When loading loose items such as firewood, scrap metal or any other item into the back of a pickup truck, use caution. Throwing items with great force can cause ricochet (bounce back) that could injury you or damage the vehicle. A Thompson employee suffered a facial laceration from steel that bounced back.
Many people travel by car for Thanksgiving.
Keep in mind the following safety tips over the holiday:
- Check your emergency kit: Contents should include: battery powered radio, flashlight, blanket, jumper cables, fire extinguisher, first aid kit, bottled water, non-perishable foods, maps, tire repair kit and flares.
- Be aware of changes in weather. Remember weather can change dramatically from when you start your trip to when you end.
- Long weekends have 18 per cent more deadly accidents than non-holiday weekends.
- Extra police force will be on the roadways this weekend to monitor aggressive, speeding, distracted and impaired drivers.
- Failing to use your seatbelt may be a bigger cause of fatal accidents during long weekends than either driver intoxication or speeding
- Children under 12 should always ride in the back seat.
In addition to road safety, please consider the following:
- Cooking mishaps account for 30 per cent of residential fires in Canada, according to data from the National Fire Information Database.
- Don’t leave your stove or oven unattended and make sure you have working smoke alarms and a fire extinguisher.
- If you have a grease fire in one of your pots, turn off the source of the heat and focus on cutting the oxygen supply. You can do so by covering up your pot with a tight-fitting lid, if you have one, or another pot.
- NEVER use water to try to put it out a grease fire! This can cause the grease to sputter and for the fire to spread.
Keep safe everyone, and enjoy this celebratory time of year.
If you ate today, thank a farmer.
Compressed gas cylinders pose significant hazards.
Consider the following safe practices:
- Store cylinders in a clearly identified, dry, well-ventilated storage area that is not exposed to heat and away from doorways, aisles, stairs, etc.
- Post “No-Smoking” signs in the storage area
- Store cylinders, both empty and full, in the upright position. Secure cylinders with a chain or properly rated belt
- Ensure that the valves are closed tightly with the protective caps in place
- If storing cylinders outside, place them on a fireproof surface and enclose a tamper-proof secured enclosure
- Protect cylinders from contact with ice, snow, water, salt, corrosion, and high temperatures
- Use a chain or adequate support system to protect cylinders from falling. Consider securing each cylinder separately to prevent other cylinders from falling when items are removed from storage.
- Separate oxygen cylinders from fuel gas cylinders or combustible materials.
In addition, always avoid the following activities:
- Avoid fastening cylinders to a work table or to structures where they could become part of an electrical circuit
- Do not store cylinders in enclosures such as lockers or cabinets
- Do not tamper or alter safety devices
- Avoid placing cylinders in a horizontal position
- Do not accept compressed gas cylinders from the supplier unless they are properly labeled and contain protective valve caps
- Avoid dragging, sliding, or dropping cylinders. They can be rolled for short distances on their base. Use of cylinder trolley or cart is preferred. Always secure the cylinder to the cart or trolley.
To be leaders in the food and agribusiness sector through sustainability, integrity, relationships, employee engagement, profitability and innovation.
- Closing Quotes CU9 @ 3.63 up 3/4 CZ9 @ 3.71 up 3/4 SU9 @ 8.56 down 4 SX9 @ 8.68 down 4 WU9 @ 4.67 up 4… https://t.co/fCOt4LflrD5 hours ago
- Closing Quotes CU9 @ 3.62 up 3 CZ9 @ 3.70 up 1 SU9 @ 8.60 up 4 SX9 @ 8.73 up 4 WU9 @ 4.62 up 2 WZ9 @ 4.68 up 1 CDN$ .7526yesterday
- RT @Stocktwits: A tutorial on how to cut losses /// h/t @crypto_blkbeard https://t.co/ZPmdlsPnOL2 days ago
- RT @farmtario: Tips to reduce your fire risk when in the field. https://t.co/GeUWtw0c9o #ontag https://t.co/zXEHfi4VNB13 days ago
- RT @farmtario: Our most-read story overnight: Ontario grain and bean handler Thompsons Ltd. to sell its crop agronomy business to retail bu…14 days ago
- RT @farmtario: How to reduce your fire risk when in the field. #ontag https://t.co/iCoCgq3Ibe https://t.co/OFNmigowrx14 days ago
- Grain marketing video comments for August 21, 2019August 21, 2019 - 4:01 pm
- Grain marketing video comments for August 13, 2019August 16, 2019 - 11:51 am
- Grain marketing commentary for August 12, 2019August 13, 2019 - 2:45 pm
- Sylvite purchases Thompsons’ agronomy business from The Andersons Inc.August 7, 2019 - 1:09 pm
- Safety: Be aware of your surroundingsJuly 18, 2019 - 10:41 am
- Market Minute with ATI’s Mark TalaskiJuly 9, 2019 - 8:37 am
- Safety: pressure washer safetyJuly 4, 2019 - 4:14 pm